PP25 is a lightweight permeable paver that has been designed to be a low cost solution providing reinforced pedestrian footpaths and car parking areas. Ideally suited for lightweight domestic installations the PP25 can be filled with either gravel or finished with a growing grass.
The paver is supplied in 500mm x 500mm x 25mm pieces made from specially selected recycled plastics suitable for all weather conditions and can cope with the temperature fluctuations of the climate. Each of the individual grids clip together as they are installed to create a single reinforced surface.
The PP25 will deliver a path or parking areas that are permeable, stable and practical. The paver can be used to renew tired, rundown and worn areas or used to create new exciting features employing chosen decorative gravels.
The PP25 is preferably built on a permeable hardcore base with stable well-draining ground conditions, however the PP25 can also be installed without a using a hardcore base. Please refer to the Suregreen technical team for help if it is unclear the ground environment is appropriate.
We advise that when filling the paver with gravel you should use sharp angular gravel with an approximate size of 4mm to 10mm. This will give a strong, durable surface that can be used for walking over and occasional car parking. It would also be suitable for disabled access allowing smooth movement of wheelchairs.
The PP25 can also provide structure and strength to grassed areas allowing them to be parked on. Normally the grass is cut to the depth of the paver with a hard core sub-base and filled with suitable soils and re-seeded. The paver can also be installed by being inverted and pushed in to the surface of the grass, please refer to the Suregreen technical team for direction.
PP25 is suitable to be used as part of SuDS - the latest government guidelines regarding flood prevention.
Please click here to see some case studies involving our Suregreen permeable paver and other ground reinforcement solutions...
There are three different installations possible with this product, a “no dig” install which is great for small domestic jobs where a full installation is not possible or needed. A “temporary” install which is a guide on how to use the PP25 as a temporary solution to ground reinforcement. The final guide is for a “full” installation which will provide a full strength surface capable of dealing with vehicle traffic. Please read each guide carefully and select the correct option for your needs. If you require any further assistance or advice please do not hesitate to contact us directly and speak to one of our experts.
“No dig’ Install:
This is the quickest and easiest installation, however it is not always possible to do a “no dig” install, firstly you must check that the desired area is flat and free draining, if it is not then please see our “full install” guide below. Due to the specially designed shape of the PP25 it can be inverted and pressed into an existing grass area this is sometimes known as a “flip and clip” install and can be done without the conventional layered install where sub-bases and geotextiles are required. The paver simply interlocks and in its inverted state should be able to be pressed in to the ground by hand, if this is not possible we advise waiting for the ground to become more forgiving otherwise it could damage the grids if forced. We also advise using this type of installation where tree root protection is a problem on site.
The “no dig” install allows ground reinforcement without the expense of a full installation, however this does not offer the same level of strength as a full install would.
Although not specifically designed for temporary usage, the PP25 can be laid temporarily, removed and reused if only required for short periods of time. The paver will need to be installed upon a firm, flat, and free draining surface; the paver is designed to conform to the shape and contours of the ground and will resist deformation and fracturing. This install requires no pegging because it gains its strength from interlocking together. This install is as simple as laying the paver on top of the desired surface. This will create a temporary surface offering improved grip and will help protect the surface from damage. Please note that when laying on top of grass that when the grass grows it can bind with the paver and make removal quite difficult.
A full installation will require the desired area to be excavated. Usually the total depth of construction is between 200mm and 250mm. After compacting the excavated area, a layer of geotextile should be laid. Over this a hard core stone sub-base is required usually to a depth of 100mm to 150mm this should be a permeable / porous reduced fines free draining angular stone with the size region of 5mm to 50mm. A vibrating whacker plate or roller should be used to consolidate this sub-base stone. A second layer of geotextile should be laid over the sub-base stone to separate the fine soil/sand root zone (for grass surface) or gravel bedding (for gravel surface), from the hard core. The geotextile will prevent fine material moving downwards, but will allow water to filter through.
For a grass finish a layer of 50 to 75mm bedding layer of good quality sandy soil should laid over the geotextile and then compacted. The PP25 plastic grids simply connect together and laid on to the compacted soil. The grids should then be filled with top soil however be careful not to overfill as extra room is required for grass growth otherwise it can cause over compaction. Once the grids and top soil are in then simply apply Suregreen grass seed, we advise using our seeds as they have been specially formulated for plastic grids.
For a gravel finish, a hardwearing angular assorted sized aggregate mixed – size of 5mm to 15mm to a depth of approximate 25mm should be laid on the top layer of geotextile. The PP25 is then placed and interlocked on this layer of gravel and then filled with more gravel. The PP25 can be lightly compacted if deemed necessary.
When installed correctly Suregreen PP25 will provide a hardwearing, robust and permeable free draining surface that would have an expected lifetime of many years. The paver itself has been deliberately designed to allow excellent grass root entanglement with its open structure and so will be able to resistant the dynamic loadings imposed by the trafficking. This will encourage strong, vibrant and sustainable grass growth with its unique shape and design.
Please click here to make an enquiry, or call our technical team on 01376 503869 for advice, project quotes, product and specification advise, technical information, design and installation guidance and CPD seminars.