Suregreen | Treated Cross Bar | 900mm x 75mm x 25mm | Green Treated | Enhances Stability
(SKU: 214505)
See full breakdown
Specification
| SKU | 214505 |
| Length | 900mm |
| Width | 75mm |
| Thickness | 25mm |
More info
Features and benefits
- Connects multiple stakes: forms a strong double or triple stake framework
- Pressure-treated timber: built for long-lasting outdoor use
- Secure fixing point: attach tree ties, belting, rubber blocks or cushions with ease
- Protects the tree: keeps ties clear of the stem to reduce rubbing and bark damage
- Stabilises young trees: helps guard against wind damage and movement
- Economical 25mm profile: a lighter, lower-cost option for standard support systems
- Versatile: suitable for landscaping, gardening, forestry and estate work
Further information
Newly planted trees need support while their roots establish, and in exposed sites one stake often isn’t enough. The Treated Cross Bar Support connects two or more stakes to form a rigid frame around the tree, spreading the load and making the whole support system more stable.
Made from pressure-treated timber for long-lasting outdoor use, the bar gives you a solid, flat surface to attach tree ties, belting, rubber blocks or cushions. The tree is held securely without the ties rubbing against the stem, which helps protect the bark as the trunk moves and thickens.
The 25mm thick version is lighter and lower in cost, making it a practical choice for standard double-stake systems on smaller trees and larger planting schemes where you need a lot of bars.
Commonly used in tree planting, landscaping, gardening, forestry and estate maintenance.
Choosing the right thickness: for larger or heavier trees and more exposed sites, consider the stronger 38mm thick cross bar.
Natural timber advisory: as a natural product, each bar may have knots, small cracks and slight variations in size. These are normal as timber dries, swells and contracts with changes in moisture and temperature, and aren’t defects. Pieces may occasionally split at weak points such as knots when being fixed or hammered, so we recommend ordering 10 to 20% more than you need to allow for natural variation and installation breakages.
Technical information
- Product: type Cross bar support for tree stakes
- Material: Pressure-treated timber
- Length: 900mm
- Thickness: 25mm
- Width: 75mm
- Use: Double and multi-stake tree support systems
- Attachments: Tree ties, belting, rubber blocks and cushions (sold separately)
- Natural characteristics: Knots, cracks and slight dimensional variation are normal
Installation: Fix the cross bar across the top of two (or more) driven stakes, then attach the tree tie, belting or rubber cushion to the bar so the tree is held clear of the stakes. Stakes, ties and fixings are sold separately.
