Rain Bird Shrub Watering Kit
(SKU: 222487)
Specification
| SKU | 222487 |
| Width | 50cm |
| Height | 51cm |
| Depth | 13cm |
Features and benefits
- Complete shrub drip irrigation starter kit with all essential components included
- BSP quick-connect fittings for fast and convenient installation
- Built-in 0.9 GPH emitters provide targeted root-zone watering
- Emitters spaced every 18" for uniform water coverage
- Pressure-compensating technology ensures consistent flow across varying elevations
- Suitable for sloped gardens and uneven terrain
- Uses up to 70% less water than traditional hand watering
- Ideal for shrubs, landscaped beds, newly planted trees and ornamental planting schemes
- Easy DIY installation with no specialist tools required
- Expandable system design for future customisation
- Compatible with irrigation timers (sold separately) for automated watering
- Durable components designed for long-term outdoor use
Further information
The Rain Bird Shrub Watering Kit with BSP Connection provides a simple and effective way to install a dedicated drip irrigation zone for shrubs, trees, borders and landscaped planting areas. Designed for easy DIY installation, the kit includes all the essential components needed to connect directly to a water source without requiring specialist tools.
At the heart of the system is 100ft of pressure-compensating emitter tubing, featuring built-in 0.9 GPH emitters spaced at 18-inch intervals. This advanced design ensures uniform water delivery across the entire irrigation line, even when installed on sloping or uneven ground.
By delivering water directly to the root zone, the system minimises water waste from evaporation, runoff and overspray, using up to 70% less water than conventional watering methods. The expandable design also allows for future system modifications as your garden develops.
For fully automated watering, the kit can be paired with a compatible irrigation timer (sold separately).
Kit Contents:
- 1 x BSP Male Quick Connect
- 1 x BSP Female Quick Connect
- 1 x Pressure Regulator with ¼" Tubing Adapter
- 100ft (30.5m) of 1/2" Pressure-Compensating Emitter Tubing
- 10 x Galvanised Metal Tubing Stakes
- 2 x End Closures
Useful Videos:
Drip Irrigation Basics: Selecting Spot Watering Devices - YouTube
Drip Irrigation Basics: How to Water Landscaped Areas
Drip Irrigation Basics: How to Install a Spot Watering System
Technical information
- Connection Type: BSP Quick Connect
- Irrigation Type: Drip Irrigation / Low Volume Irrigation
- Tubing Type: Pressure-Compensating Emitter Tubing
- Tubing Diameter: 1/2" (12.7mm)
- Tubing Length: 100ft (approximately 30.5m)
- Emitter Flow Rate: 0.9 GPH
- Emitter Spacing: 18" (457mm)
- Installation: Tool-free DIY installation
- Application: Shrubs, landscaped areas, flower beds, garden borders and young trees