Loading...

GR10 | 2.5m x 5m | with 50 pins

(SKU: 212136)

See full breakdown

Specification

More Information
SKU 212136
Weight 19kg
Size 2.5m x 5m with 50 pins
More info

Features and benefits

  • Grass reinforcement for small vehicles on stable ground
  • Grass protection mesh is ideal for permanent applications
  • Fast to install, cost-effective and suitable for domestic driveways or infrequent commercial parking needs
  • Mesh is laid and fixed directly to the existing surface - no soil removal or excavation required
  • Slip-resistant mesh structure - this slip resistance can also be improved by adding a thin layer of sand on the mesh to provide increased grip and traction
  • Prevents grass wear, rutting and mud caused by cars and traffic
  • An environmentally conscious alternative to impermeable paved surfaces
  • Allows for a natural grassed traffic route where planning restrictions are applied or where cost savings are being considered
  • Ideal for use in Source Control applications as part of a Sustainable Urban Drainage System (SuDS)
£131.99
You have selected more items than we have available in stock (59)
Please note that your order will be dispatched when stock is available.
Our payment options

Full specification

More Information
SKU 212136
Weight 19kg
Size 2.5m x 5m with 50 pins

Further information

GR10 grass reinforcement mesh provides strong, permanent protection by reinforcing existing grass areas against traffic damage from smaller vehicles and pedestrians. This lighter-grade mesh has been designed to allow prolonged summer and winter use of grass parking areas whilst maintaining the visual aesthetic of the area.

GR10 grass reinforcement mesh has been specially designed to allow quick and maximum grass entanglement, giving good structure and encouraging the mesh to visually disappear into the grass after regrowth. The plastic mesh has also been designed with an oscillated structure providing enhanced anti-slip properties whilst retaining the necessary resistance to damaging traffic movements.

The suitability and success of using grass reinforcement mesh depend on a number of factors including the frequency of use, type of traffic, nature of the soil and drainage. Grass Reinforcement Mesh is best suited to free-draining, existing grass areas.

Please note that the load-bearing capacity and other specifications stated are reliant on ground conditions and our installation guides being followed. We ask that you consult one of our technical team before purchasing if you are concerned about any of the information stated.

Like all Suregreen ground reinforcement solutions, GR10 grass reinforcement mesh is compliant with SuDS Source Control (Sustainable Urban Drainage Systems).

Applications:

  • Domestic car parking requirements
  • Infrequently used overflow grass car parks
  • Allowing off-road parking on grass verges
  • Heavy footfall areas
  • Disabled (DDA) wheelchair access routes and paths
  • Access to grass areas normally closed off to trafficking

 

GR10 grass reinforcement mesh is quick and easy to install - simply roll out over the existing grass and firmly fix it in place using Suregreen’s Premium U-pins. Once the mesh has been pinned down, we advise that you allow a sufficient amount of time for the grass to grow through the mesh and take hold. It's this process of the grass intertwining with the mesh that gives it strength and integrity. If trafficked too early, the mesh performance will be compromised and this may also cause sinking or smearing. Therefore we advise that the area is not utilised until you have mowed the grass at least two to three times.

Technical information

Characteristics

Data

Structure

Oscillated

Polymer

High Density Polyethylene

Recycled polymer

Yes

Slip-Resistant design

Yes

Ecology Influence

Environmentally Neutral 

Securing Method

Steel Pins 170mm x 70mm x 6mm diameter

Colour

Green

Slip risk PTV value

40 (low)

UV Stabilised

Yes

Production & Quality Control

GB/T 9001-2008 / ISO 9001-2008

Nominal Data

Standard GR10

Width (Metres)

1

2

2

Length (Metres)

10

10

20

Roll Weight (Kg)

9

19

38

Thickness

10mm

Weight

0.95k/gm²

Tensile Strength (kN/m) (MD/TD)

8 kN/m

Tensile Elongation (%)

15%