Adjustable Gate Hinge Sets with Hook on Plate | Galvanised | Timco
Specification
| SKU | 202137-202151 |
| Weight | 4.93kg-6.46kg |
| Size | 300mm, 450mm, 600mm |
Features and benefits
Full specification
| SKU | 202137-202151 |
| Weight | 4.93kg-6.46kg |
| Size | 300mm, 450mm, 600mm |
Further information
TIMCO Galvanised Adjustable Fieldgate Hinge Set with Hook on Plate has been specially designed for use on agricultural field gates and driveway gates that are to be hung on timber, concrete or masonry posts. The hinge set provides exceptional support to the gate as the top band and bottom strap wrap around the gate and are fixed with cup square bolts to fix firmly in place. The bottom fitting clamps around the heel of the gate and is adjustable to allow for easy gate alignment after fitting. This is particularly useful when hanging pairs of gates. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate.TIMCO Galvanised Adjustable Fieldgate Hinge Set contains:- Top Strap (Qty 1)- Adjustable Bottom Fitting (Qty 1)- Hook on Plates (Qty 2)- Galvanised Cup Square Bolts, Hex Nut & Washer (Qty 4)- Galvanised Coach Screws (Qty 8)
Technical information
- Top Strap: 300mm
- Strap:6mm
- Hook on Plate:100x100mm
- Gate Eye Size: M19x250mm
- Heel Clip Size:86x50x32mm
- Pin: 19mm
- To Suit Gate: 900-1200mm - 3/4ft Wide
- To Suit Gate: 75mm Thick
- No Coach Screws: 8 x M10
- No Carriage Bolts: 2 x M10
- Top Strap: 450mm
- Strap:6mm
- Hook on Plate:100x100mm
- Gate Eye Size: M19x250mm
- Heel Clip Size:86x50x32mm
- Pin: 19mm
- To Suit Gate: 1200-2700mm - 4/9ft Wide
- To Suit Gate: 75mm Thick
- No Coach Screws: 8 x M10
- No Carriage Bolts: 3 x M10
- Top Strap: 600mm
- Strap:6mm
- Hook on Plate:100x100mm
- Gate Eye Size: M19x250mm
- Heel Clip Size:86x50x32mm
- Pin: 19mm
- To Suit Gate: 2700-3600mm - 9/12ft Wide
- To Suit Gate: 75mm Thick
- No Coach Screws: 8 x M10
- No Carriage Bolts: 3 x M10