TRUCKGRID-Lite Porous Pavers
TRUCKGRID-Lite porous pavers are designed for heavy-weight ground reinforcement, where traffic may be regular cars, vans, lorries or fork-lift trucks.
TRUCKGRID-Lite is manufactured from 100% recycled plastics and gets its strength from a cell wall thickness of 5mm. Each plastic paving grid is robust and connect using a positve interlock providind structural integrity to form a weight of 10.5kg/sqm. TRUCKGRID-Lite porous pavers can be filled with either a angular stone (gravel) or grass surface. Most applications for this produce use a gravel surface to provide a permeable pavement surface capable of withstanding heavy weight vehicles. A gravel fill in the heavy-duty plastxc pavers creates a permeable paving surface that is ideal for vehicles that insert a vertical load-bearing and dynamic force into the surface.
TRUCKGRID-Lite's thick permeable palstic grids should be installed onto a well-prepared stone sub-base. This sub-base should be an angular free draining stone, deep enough to support the required loads. Please view the following TRUCKGRID-Lite Installation guideline.
- Industrial / Factory yards / outside storage areas
- HGV loading areas
- Forklift truck access areas
- Coach and Bus parking
- Car Parks
- Access Roads
- Fire Access Lanes
- Tested to DIN 1072, SLW 60
- Load-Bearing 10 tonnes per wheel / 20t axle loads
- Interlocking connections
- Thick 5mm cell walls
- Heavy weight 10.5kg/sqm
- Frost and UV-resistanT
- Each grid 50cm x 4cm x 40cm (5 grids = 1sqm)
TRUCKGRID-Lite heavy-load bearing plastic pavers meet the demands laid down by local government regarding flood alleviation and SUDS (Sustainable Urban Drainage Systems), requirements.
We would always advise for large installation that you speak to one of our technical team, or visit out technical website where you can download design documents, installation guides, view case studies and more