Soffit vent Mesh
Soffit vent mesh is a black plastic mesh for preventing birds and insects entering soffits, vents, ventilation areas, roofs and new builds where building regulations dictate that ventilation is required.
Soffit vent mesh is a black plastic mesh with 2mm holes for screening and preventing birds and insects. Soffit vent mesh is UV stabilised and supplied on the following rolls sizes for a multitude of different soffit sizes or ventilation area requirements(width x length):
- 7.5cm x 30m
- 10cm x 30m
- 15cm x 30m
- 20cm x 30m
- 25cm x 30m
- 30cm x 30m
The fine plastic mesh has a diamond hole size of 2mm x 2mm, which helps stop most insects, debris and birds from entering the roof space.
Soffit mesh is designed to be installed into the vents on the soffits and any other area on new builds and renovations where access to birds and insects needs to be stopped or limited. The plastic vent mesh allows the roof space to breathe, reducing condensation risk through the eaves as ventilation is not affected.
- Soffit vent mesh is easy to install and can be cut using scissors or safety knives
- The plastic vent mesh can be pinned, taped or glued in the required position
- Suitable for plastic or wooden / timber soffits
- Suitable for use in conservatories to limit insects access between the roof and wall joints